EINHELL TP-AG 18/125 CE Q Li Manual De Instrucciones página 17

3. Proper use
The angle grinder is designed for grinding metal
and stone when using the appropriate grinding
wheel and guard.
Warning! To cut metal and stone the grinder/san-
der may only be used when the guard (available
as an accessory) is mounted.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Motor power supply: ............................... 18 V DC
Rated speed: ............................3000-10500 min
Max. wheel diameter: ............................. 125 mm
Grinding wheels: ...................... 125 x 22 x 6 mm
Cutting wheel: .......................... 125 x 22 x 3 mm
Mounting spindle thread: ............................. M14
Weight: .....................................................1.75 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841.
L sound pressure level ................... 85.86 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ..................... 93.86 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 62841.
Handle
Vibration emission value a
K uncertainty = 1.5 m/s
Anl_TP_AG_18_125_CE_Q_Li_SPK13.indb 17 Anl_TP_AG_18_125_CE_Q_Li_SPK13.indb 17
-1
= 8.612 m/s
2
hAG
2
- 17 -
GB
Additional handle
Vibration emission value a
K uncertainty = 1.5 m/s
2
The specifi ed vibration value was established in
accordance with a standardized testing method.
It may change according to how the electric
equipment is used and may exceed the specifi ed
value in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools. The specifi ed vibration value can be used
for initial assessment of a harmful eff ect.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
= 10.94 m/s
2
hAG
28.11.2022 11:33:08 28.11.2022 11:33:08