CEVIK PRO CA-PRO100-3M Manual De Instrucciones página 24

EN
INTRODUCTION.
We appreciate the trust placed in our brand and we hope that the compressor you have just
acquired will be very useful. Your machine has many features that will make your job faster and
easier. Safety, comfort and reliability were taken as a priority for the design of this equipment,
which makes maintenance and operation easy.
GENERAL-SAFETY-RULES.
WARNING!:
These instructions have been developed to facilitate the installation,
operation and proper maintenance of the equipment. Read the complete manual carefully
before commissioning the compressor to understand its functionalities and reduce risks during
its operation. Read and understand all instructions. Be sure to pay attention to all warnings and
cautions throughout this manual. Failure to follow the instructions contained in this manual may
result in electric shock, and / or serious personal injury.
SAVE THESE INSTRUCTIONS
WORKING-AREA
•
Keep your working area clean and well lit. Messy tables and dark areas can cause accidents.
• Do not use the compressor in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. The electric tool generates sparks that can cause fires.
ELECTRICAL-SAFETY.
WARNING!:
•
Before connecting the compressor to a power source (mains socket, generator, etc.) make sure
that the voltage provided is the same as the one mentioned on the technical data plate of the
equipment. A source of power greater than that specified for the compressor can cause serious
injury to the user, as well as equipment damage.
• Avoid body contact with grounded surfaces such as pipes, radiators and refrigerators. There is
an increased risk of electric shock if your body is grounded.
• Do not expose the compressor to rain or moisture conditions. The entry of water into the
equipment will increase the risk of an electric shock.
• Do not damage the cable. Never use the cable to carry the compressor or pull the cable out of
the outlet. Keep the cable away from heat, oil, sharp edges and moving parts. Replace damaged
cables immediately. Damaged cables increase the risk of electric shock.
• When using the outdoor compressor, if required, use an outdoor extension cord. These
extensions are designed to work outdoors and reduce the risk of electric shock.
• It is recommended that you use an appropriate safety device, such as a thermal and differential
switch when using electrical equipment.
24