ESPAÑOL
10. COPYRIGHT
Los derechos de propiedad intelectual sobre los textos de este manual pertenecen a CECOTEC
INNOVACIONES, S.L. Quedan reservados todos los derechos. El contenido de esta publicación no
podrá, ni en parte ni en su totalidad, reproducirse, almacenarse en un sistema de recuperación,
transmitirse o distribuirse por ningún medio (electrónico, mecánico, fotocopia, grabación o
similar) sin la previa autorización de CECOTEC INNOVACIONES, S.L.
46
POWER MATIC-CCINO CREMMA
1. PARTS AND COMPONENTS
Fig. 1
1. External drip tray
2. Internal drip tray
3. Coffee-residue residues tank
4. Adjustable coffee spout
a. Adjustable coffee-spout cover
b. Milk frother / Cappuccinatore
Milk tank connector-tube inlet
c.
d. Coffee spout
e. Milk spout
5. Control panel
6. Coffee-bean tank
7. Coffee-bean tank cover
8. Water tank
9. Power cord
10. Side cover
11. Brewing unit
12. Cleaning brush
13. Milk-tank
14. Milk-tank cover
15. Milk-tank connector tube
16. Cappuccinatore connector tube
17. Rubber connector piece
18. Milk-tank interior tube
19. Needle
Control panel
Fig. 2
20. Strong-coffee button: to prepare a coffee with more ground coffee and less water.
21. Mild-coffee button: to prepare a coffee with less ground coffee and more water.
22. Cappuccino button: to prepare a coffee with milk and lots of foam, pouring the milk first
and then the coffee.
23. Latte-macchiato button: to prepare a coffee with frothed milk by pouring the milk first and
then the coffee.
24. Frothed-milk button.
25. Hot-water button.
26. If the icon flashes: low water level/water tank not installed.
27. If the icon flashes: insert coffee beans.
28. If the icon remains steady: the coffee-residue tank is full.
If the icon flashes: interior drip tray/coffee-residue tank not installed.
ENGLISH
47
POWER MATIC-CCINO CREMMA