Troubleshooting - Amprobe TMA40-A Manual De Uso

-insert the software Cd into Cd-RoM driver
-install the USb driver first
-install the software follow the on-screen instructions
-open the program
-Click the "port" from main screen and input the right comm. port.
-Click as follow to download the memory
1. Click to download manually recorded data.
2. Click to download automatically recorded data
3. Click to download both manually & automatically recorded data

TROUBLESHOOTING

Power on but no display
• Make sure the time of pressing "on/off" key is more than 0.2 seconds.
• Check the batteries are in place and make sure they are at good contact and correct polarity.
• Replace the batteries and try again .
Display disappear
• Check whether the low battery indicator is displayed on or before display disappears. if yes,
replace the batteries .
Error code:
• e2. problem : Meter value is underflow .
• e3. problem : Meter value is overflow.
• e4. problem: Calculated source value occurs error.
9