Qilive Q.1708 Manual Del Usuario página 8

5.3 Music control
EN
1. Press the
2. Press the
3. Press and hold the
4. Press the
5. Press and hold the
5.4 Calls control
1. Press the
end it.
2. Press and hold the
3. Press and hold the
5.5 TWS mode
If you have two Q.1708 bluetooth speakers, you can enjoy TWS
functions.
1. Make sure the speakers have no connection with other devices.
2. Power on the two Bluetooth speakers. Press the
seconds on either one to turn on the TWS connection. There will
be a beep notification. Then, two Bluetooth speakers will make a
connection by themselves automatically. A beep will sound when the
two speakers connect automatically.
3. Repeat the "First use" operation to pair them.
5.6 Aux-in mode
1. Using the supplied 3.5mm AUX-IN cable, insert one end into the AUX
port of the Bluetooth speaker.
2. Insert the other end of the supplied 3.5mm AUX-IN cable to the AUX-
IN port of your device.
3. Press the
button to play or pause the music.
button to decrease the volume.
button for 2 seconds to play the previous track.
button to increase the volume.
button for 2 seconds to go to the next track.
button to answer an incoming call and press it again to
button for 2 seconds to reject an incoming call.
button for 2 seconds to redial the last call.
button to play or mute the music.
8
button for 2