SMA SB3.0-1SP-US-40 Instrucciones De Servicio Técnico página 7

Damage to the inverter due to electrostatic discharge
Touching electronic components can cause damage to or destroy the inverter through
electrostatic discharge.
• Ground yourself before touching any component.
Damage to the product due to cleaning agents
The use of cleaning agents may cause damage to the product and its components.
• Clean the product and all its components only with a cloth moistened with clear water.
Electrical installations (for North America)
All installations must conform with the laws, regulations, codes and standards applicable in the
jurisdiction of installation (e.g. National Electrical Code
®
Electrical Code
CSA-C22.1.).
• Before connecting the product to the utility grid, contact your local grid operator. The
electrical connection of the product must be carried out by qualified persons only.
• Ensure that the cables or conductors used for electrical connection are not damaged.
Service Manual
2 IMPORTANT SAFETY INSTRUCTIONS
NOTICE
NOTICE
®
ANSI/NFPA 70 or Canadian
SBxx-1SP-US-40-AT-PU-SG-xx-13 7