Use approved eye protection.
Use approved protective gloves.
Use approved protective boots.
This product is in compliance with
applicable EU directives.
Note:
Other symbols/decals on the product refer to
special certification requirements for some markets.
Type plate
1
2
13
12
11
10
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
1838 - 003 - 09.02.2023
3
4
7
8
Used if there is a risk of
Used if there is a risk of
1. Product number
2. Product weight
3. Rated power
4. Rated voltage
5. Enclosure
6. Rated current
7. Frequency
8. Maximum slope angle
9. Manufacturer
10. Scannable code
11. Production year
12. Model
13. Serial number
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
•
the product is incorrectly repaired.
•
the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
•
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
•
the product is not repaired at an approved service
center or by an approved authority.
5
6
9
Safety
Note:
Used to give more information that is necessary
in a given situation.
General safety instructions
WARNING:
instructions that follow before you use the
product.
•
This product is a dangerous tool if you are not
careful or if you use the product incorrectly. This
product can cause serious injury or death to the
operator or others. Before you use the product,
you must read and understand the contents of this
operator's manual.
•
Save all warnings and instructions.
Read the warning
5