4.
USE OF THE RADIATOR
4.1 INFORMATION FOR THE USE OF THE RADIATOR
The appliance is equipped with two knobs: knob A for operating mode selection and knob B for temperature adjustment. Knob B
also serves as a confirmation key.
To use the radiator, select the operating mode using knob A.
4.2 DESCRIPTION OF OPERATING MODES
The operating modes are as follows (clockwise from left to right): Stand-by (Stop), Pilot Wire (only used in France, see paragraph 2),
Comfort (manual), Night (reduction), Freeze protection, Programming (Chrono).
MODES
Stand-by (Stop): No active function, the radiator does not heat up.
Warning: the radiator is electrically powered.
Not active: the radiator is controlled by a remote power station.
Comfort: The radiator heats the environment according to the set temperature (high level).
Night: The radiator heats the environment according to the set temperature (low level).
Freeze protection: the radiator is set at 7°C.
Chrono/Programming: the radiator follows the programming set by the user, between the two high and
low temperature levels.
Description
21-EN