Publicidad
Idiomas disponibles
Idiomas disponibles
4.4 PARAMETER SETTING
Turn knob A to the Stand-by/stop position and then press and hold knob B for a few seconds, a menu will
open with the following options:
HEJ: setting of hour, minutes and day of the week.
Fon: allows activating or disabling, in sequence, window opening detection and ASC functions.
EtAl (calibration): allows adjusting the temperature setpoint to +/- 5°C.
Lng: language selection, default is French, can be set to English.
Turn and then press knob B to select the parameter you want to change.
Once the parameter is selected, it can be edited by turning and pressing knob B, as indicated below.
HEJ:
The day of the week can be set from 1 to 7 (1= Monday .... 7 = Sunday).
The hour can be set from 0 to 23, minutes can be set from 0 to 59.
Warning: In the event of a power failure, date and time are reset. In such case, you will need to set them again.
Fon:
Select this function to activate/disable the two parameters in sequence:
-
ASC
-
Window opening detection
Use knob B to select whether to activate (OUI) or not (NON) the parameter:
24-EN
Publicidad
