VALBERG 10S44 D SAD929C Manual De Instrucciones página 19

B
Using the appliance
To reset the dishwasher, follow the instructions below:
1. Press the Start/Pause button to pause the washing.
2. Press Program button for more than 3 seconds the machine will be in program selection
mode.
3. You can change the program to the desired cycle setting.
3 sec
Forget to add a dish?
A forgotten dish can be added any time before the detergent dispenser opens. If this is the
case, follow the instructions below:
1. Press the Start/Pause button to pause the washing.
2. Wait 5 seconds then open the door.
3. Add the forgotten dishes.
4. Close the door.
5. Press the Start/Pause button, the dishwasher will continued to run after 10 seconds.
After 5 sec
WARNING
It is dangerous to open the door mid-cycle, as hot steam
may scald you.
34 EN
B
Using the appliance
Automatic opening / Activ'Door
At the end of the wash, the door will open automatically for optimal drying.
NOTE
Except programs of "Rapid" and "Soak", other programs
have Activ'Door by default.
NOTE
The dishwasher door must not be blocked when set to open
automatically.
This can disrupt door lock functionality.
35 EN