VALBERG 10S44 D SAD929C Manual De Instrucciones página 26

C
Useful information
Availability of spare parts
Seven years after placing the last unit of the model on the market:
Motor, circulation and drain pump, heaters and heating elements, including heat pumps
(separately or bundled), piping and related equipment including all hoses, valves, filters and
aqua stops, structural and interior parts related to door assemblies (separately or bundled),
printed circuit boards, electronic displays, pressure switches, thermostats and sensors,
software and firmware including reset software.
Ten years after placing the last unit of the model on the market:
Door hinge and seals, other seals, spray arms, drain filters, interior racks and plastic
peripherals such as baskets and lids.
48 EN
C
Useful information
Error codes
If there is a malfunction the dishwasher will display an error code. The following table shows
possible error codes and their causes.
Codes Meanings
E1 Longer inlet time.
Not reaching required
E3
temperature.
E4 Overflow.
Failure of orientation of
E8
distributary valve.
Failure of communication
Ed between main circuit board with
display circuit board.
WARNING
• If overflow occurs, turn off the main water supply before
calling a service.
• If there is water in the base pan because of an overfill or
small leak, the water should be removed before restarting
the dishwasher.
• If there is an error code that cannot be solved, please
request professional assistance.
49
Possible causes
Faucets is not opened, or water
intake is restricted,or water
pressure is too low.
Malfunction of heating element.
Some element of dishwasher leaks.
Open circuit or break of distributary
valve.
Open circuit or break wiring for the
communication.
EN