Descargar Imprimir esta página

Amsta AMCG90BM Manual De Instrucciones página 37

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation
Place your product after you control the required power and gas connection. When
placing, make sure that the gas hose and power cable is not near the hot surface of the
product.
When placing, make sure that the gas hose and power cable have not been damaged.
Set your product to the kitchen counter as a minimum according to the
dimensions shown in the Figure 7.
Disposal of the product
Destruction of the product
Packaging materials are dangerous for children. Keep the packaging materials at such a
place that cannot be reached by the children.
The package of the product is made of recyclable materials. Sort it out according to the
instructions on waste and dispose it. Do not throw it together with normal domestic
waste.
Transportation operations in future
Keep the original package of the product and move the product in this original packaging.
Observe the instructions on the box. If the original box is not available, then wrap it by blister
packaging material or thick paperboard and tape it firmly.
In order to prevent that the wire grill and tray in the oven do not give any damage to the
inner side of the oven's door, place a cartoon strip on the inner side of the oven's door so
that it is in alignment with these trays. Tape the oven's door to the side walls.
Tape the caps and tray supports firmly in place.
Do not use the door or handle to move or transport the product
Do not put any object on the product. The product should be moved upright.
Control the general view of the product for any damage that may occur during
transportation.
Figure 7
15

Publicidad

loading