Disposal of old product
Dispose of the old product so that it does not give any damage to the environment. This product has
a symbol (WEEE) on this product, indicating that the electric and electronic equipment waste should
be collected separately. In other words, it means that in order to recycle or disassemble this
equipment to minimize any effect of it on the environment, the EU Directive 2002/96/EC should be
observed. For further information, contact with the concerned local and regional authorities.
Electronic products not subject to any controlled waste collection process constitute potential risk
both for the environment and human health as they contain harmful substances.
You may refer to your authorized dealer or waste collection center of your municipality for due
disposal of the product.
Always cut the power plug and break the door lock, if any, so that the children may not be exposed to
any danger.
4)
Initial Preparation
Things required to be done for energy saving
The following information would help you use the product ecologically and for energy saving:
•
Use containers, dark in color or enamel coated for better heat transmission in the oven.
•
When cooking the food, preheat the oven if it is required to be done as per the recipe or the
table given in the operating manual.
•
Do not open the oven door frequently when cooking.
•
Try to cook more than one food in the oven simultaneously. You may do that by putting two
cooking pots on the wire shelf.
•
Cook more than one meal consecutively. So the oven will not lose its heat.
•
Switch the oven off several minutes before expiration of the cooking time. In such case, do not
open the oven door.
•
Defrost the frozen food before cooking.
First use
First cleaning
Some detergents or cleaning agents may give damage to the surface.
1.
Take off all packaging materials.
2.
Wipe surface of the product by a damp cloth or sponge and wipe it dry by a cloth.
First Heating
Heat the product about 30 minutes and then switch it off. Thus any waste and layers possibly left in
the oven during production are cleaned by elimination through incineration. Hot surfaces may
cause to burns! Do not touch hot surfaces of the unit. Keep the children away from the product and
use oven gloves!
Electric oven
1.
Take out all oven trays and wire shelf from the oven.
2.
Close the oven door.
3.
Select the static position.
4.
Select the highest temperature; see Use of the electric oven,
5.
Operate about 30 minutes.
6.
Switch off the oven; see Use of the electric oven,
Smell and smoke occurs during the first heating. Ensure well-ventilation.
16