Gianni Ferrari PG210 Manual Tecnico página 22

6. UsiNG CoNtroLs ANd iNstrUMENts
6.1 ForwArd - rEVErsE
6.2 PArKiNG BrAKE LEVEr
6.3 diFFErENtiAL LoCKiNG dEViCE
6.4 By-PAss LEVEr
ImPORtANt:
Avoid towing the machine for long stretches with inserted by-pass.
6.5 HANd tHroLLE
6.6 ENGiNE stArtiNG
Only PG/SR 210 D models .
6.7 P.t.o
See figure 6.7
6.8 HydrAULiC LiFt oF tHE EQUiPMENt
6.9 HydrAULiC tiLtiNG oF trAy
A.
Basket overturning lever
B.
Lever for quick grips control
6.10 ELEVAtor
See figure 6.10
A.
Basket lifting lever
B.
Basket overturning lever
C.
Lever for quick grips control
ImPORtANt:
When trasferring the machine, especially when makin curves, do not procede in any case with
basket outside.
6.11 dEsCriPtioN FUNCtioNs CoMPUtEr
1. Motor oil pressure lamp
2. Fuel reserve lamp
3. Battery alternator lamp
4. parking brake inserted lamp
5. Cooling fluid max temp. lamp
6. Button
7. display
By pushing the button in pos. - 6 - you can:
- Visualize on the display the temperature of the radiator liquid;
- The total number of hours worked by the machine (hour counter).
The display also shows the following :
- The countdown for the pre-heating plugs (only diesel version);
- All the error codes (see chap. 20);
- Carry out a diagnostic of the switches mounted on the machine (see chap. 7.6) .
See figure 6.1
See figure 6.2
See figure 6.3
See figure 6.4
See figure 6.5
See figure 6.6
See figure 6.8
See figure 6.9
See figure 6.11
EN
25