Control Panel - Fender TONE MASTER Twin Reverb-Amp BLONDE Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

In a bold Fender first, the Tone Master Twin Reverb amplifier uses
massive digital processing power to achieve a single remarkable
sonic feat: faithfully modeling the circuitry and 85-watt power
output of an original Twin tube amp. Using a high-performance
200-watt digital power amp to achieve the headroom and dynamic
range of a real vintage Twin tube amp, paired with the pronounced
punch and warmth of two Celestion® G12 NEO Creamback speakers
and a resonant pine cabinet, the result is tubeless Twin Reverb tone,
volume and dynamics virtually indistinguishable from the all-tube
original. And with all these features, the Tone Master Twin Reverb is
in fact about only half the weight of an all-tube Twin.
A. NORMAL CHANNEL INPUTS: Connect instrument here. Normal
input 1 produces full sensitivity; normal input 2 has adjusted
sensitivity (-6dB) for slightly darker tone and cleaner response
with high-gain instruments.
B. NORMAL CHANNEL BRIGHT SWITCH: High-frequency boost for
normal channel.
C. NORMAL CHANNEL VOLUME: Controls volume level of both
normal channel inputs.
D. NORMAL CHANNEL TREBLE: Controls treble response of both
normal channel inputs.
E. NORMAL CHANNEL MIDDLE: Controls midrange response of
both normal channel inputs.
F. NORMAL CHANNEL BASS: Controls bass response of both
normal channel inputs.
G. VIBRATO CHANNEL INPUTS: Connect instrument here to use
built in "vibrato" (tremolo) effect. Input 1 produces full sensitivity;
input 2 has adjusted sensitivity (-6dB) for slightly darker tone and
cleaner response with high-gain instruments.
H. VIBRATO CHANNEL BRIGHT SWITCH: High-frequency boost for
"vibrato" (tremolo) channel.
TONE MASTER
®

CONTROL PANEL

TWIN REVERB
®
Front panel features give guitarists a playing experience identical
to the tube version, including Fender's world-standard reverb and
tremolo effects. Additional rear-panel features deliver modern
convenience and flexibility—including an output power selector for
full power and five attenuated settings, balanced XLR line output
with impulse response (IR) cabinet simulations, mute switch for silent
stage or recording use, USB port for firmware upgrades, and more.
Register your Tone Master Twin Reverb online at start.fender.com.
I. VIBRATO CHANNEL VOLUME: Controls volume level of both
vibrato channel inputs.
J. VIBRATO CHANNEL TREBLE: Controls treble response of both
vibrato channel inputs.
K. VIBRATO CHANNEL MIDDLE: Controls midrange response of
both vibrato channel inputs.
L. VIBRATO CHANNEL BASS: Controls bass response of both
vibrato channel inputs.
M. REVERB: Controls reverb effect level. No reverb is heard when
control is turned fully counterclockwise. Reverb can also be
turned on and off using included two-button footswitch.
N. SPEED: Controls "vibrato" (tremolo) effect rate.
O. INTENSITY: Controls "vibrato" (tremolo) effect depth. No effect
is heard when control is turned fully counterclockwise. Effect can
also be turned on and off using included two-button footswitch.
P. POWER JEWEL: Illuminates red when amplifier is on; flashes
between red and amber during warmup. Illuminates amber in
MUTE mode (S).
1
BLONDE

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Tone master twin reverb-amp

Tabla de contenido