Horizon Fitness 7.4 AT Manual Del Propietário página 9

TOOLS INCLUDED:
F 8 mm T-Wrench
F 6 mm L-Wrench
F 5 mm L-Wrench
PARTS INCLUDED:
1 Main Frame
F
1 Console Assembly
F
2 Console Masts
F
F 1 Cross Support Bar
F 1 Hardware Kit
F 1 Safety Key
F 1 Audio Adapter Cable
F 1 Bottle of Silicone Lubricant
(for 2 applications)
F 2 Pulse Rate Grips
NEED HELP?
If you have questions or if there
are any missing parts, contact
Customer Tech Support. Contact
information is located on the
back panel of this manual.
WARNING
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
WARNING
DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift treadmill from
packaging until specified to do so in the assembly instructions. You may remove the
plastic wrap from console masts.
WARNING
Never open box when it is positioned upside-down or on its side.
Unpack and assemble the unit where it will be used.
The enclosed treadmill is equipped with high-pressure springs which can cause the
lower base frame to spring open if mishandled.
The red transport cables are installed between the upper deck frame and the lower
base frame to prevent the movement of the lower base frame. DO NOT remove red
transport cables until instructed to do so.
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially
threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any grease, such
as lithium bike grease is recommended.
9