Publicidad
Idiomas disponibles
Idiomas disponibles
Bluetooth® Device
Bluetooth® Device
You can use the mobile phone and portable audio
player connected through Bluetooth.
• While using Apple CarPlay, Android Auto, or USB
Mirroring, use their features for hands-free phones
and audio playback. (The Bluetooth device currently
connected is disconnected when an iPhone with
Apple CarPlay or an Android device with Android
Auto is connected.)
Note
• While driving, do not perform complicated
operations such as dialing numbers, using the phone
book, etc. When you perform these operations, stop
your car in a safe place.
• To use the Bluetooth function, you need to turn on
the Bluetooth function of the device.
• Some Bluetooth devices may not be used with this
unit depending on the Bluetooth version of the
device.
• When a Bluetooth mobile phone is connected, the
signal strength and battery level are displayed when
the information is acquired from the device.
• If your mobile phone supports PBAP (Phone Book
Access Profile), you can display the following items
on the touch panel when the mobile phone is
connected.
– Phone book
– Dialed calls, received calls, and missed calls (up to
100 entries in total)
• Two devices for Bluetooth mobile phone and one for
Bluetooth audio can be connected at a time.
However, when [Bluetooth Audio] is selected as the
source, you can connect up to five Bluetooth audio
devices and switch between these five devices.
Bluetooth mobile phone
When a call comes in, this unit automatically enters
[Phone], and when it ends, go back to the previous
source.
When a call comes in...
1
2
Device Name 1
Device Name 2
Incoming Call
Name
1234XXXXXX
1 Phone device information
• Either hands-free phone 1 or 2 is highlighted
to indicate which phone is ringing when a call
comes in.
Touching the operation keys performs the following
actions:
[ ]
Answers a call.
[
]
Rejects a call.
• Call information is displayed if acquired.
• Phone operation is not available while the picture
from any camera is displayed.
During a call...
1
2
Device Name 1
Device Name 2
Name
Talking...
1234XXXXXX
NR LEVEL –
0
–
EC LEVEL
0
–
MIC LEVEL
0
DTMF
Touching the operation keys performs the following
actions:
[
]
Ends a call.
Switches between hands-free mode
[
]/
and phone mode.
[
]
[DTMF]
Enters DTMF (Dual Tone Multi
Frequency). You can send a text using
the keypad.
NR LEVEL
Adjusts the noise reduction level.
[–] / [+]
(–5 to 5)
EC LEVEL
Adjusts the echo volume level.
[–] / [+]
(–5 to 5)
MIC LEVEL
Adjusts the volume level of the
[–] / [+]
microphone. (–10 to 10)
• Press volume + / – buttons on the monitor panel to
adjust the volume of the call or earpiece.
+
+
+
ENGLISH
21
Publicidad
