OK. ORD 300 Manual De Instrucciones página 16

EN
POWER SUPPLY
If operation by mains power is not possible the radio can be powered by batteries.
Attention!
Fig. 1
• Do not use this product with power supply and battery operation
simultaneously.
• Remove all of the batteries when operating this product via power supply.
1. Operation by mains
Insert the DC plug of the power supply into the DC input socket DC IN.
Then plug the power supply into a mains socket.
2. Operation by batteries
1. Open the battery compartment.
2. Insert 6 x 1.5 V battery (type C/LR14, not included). Make sure the
polarity is correct as indicated.
3. Close the battery compartment.
OPERATION
Antenna
Fig. 2
Screw the antenna onto the antenna connector.
Turning the unit on/off (Standby)
Press the
Adjusting the volume
The volume can be adjusted during playback with the volume control VOLUME.
DAB RADIO
Press SOURCE to select DAB mode.
Fig. 3
When the radio is switched on for the first time, it will automatically do a full
scan of DAB/DAB+ stations. The list of stations is then stored, eliminating the
need for another full scan when the radio is turned on next time.
When the scan is complete, the stations are stored in alphabetical order. The
first available station will be played back.
Note:
If there is no DAB reception at any time, change the position of the unit or
adjust the antenna.
CHANGING DAB/DAB+ STATIONS
Press the buttons + or – in DAB mode to navigate available DAB/DAB+ stations.
DAB MODE-AUTO SCAN
Long press the button MENU in DAB mode and then the buttons + or – buttons until
<Station scan> appears on the display. Press ENTER to confirm. Use the + or – buttons
to select <Full scan> and confirm with ENTER.
The unit scans all available DAB/DAB+ stations and plays the first available station.
Alternative, you can activate the auto scan function by pressing SCAN.
Note:
New stations and services are added to the stored DAB/DAB+ stations. In order to
make new DAB/DAB+ stations and services available on your radio, run a full scan at
regular intervals.
IM_ORD300_A5_201202_V04_HR.indb 16 IM_ORD300_A5_201202_V04_HR.indb 16
16
standby button to turn on/off the unit.
2/12/2020 2:21 PM 2/12/2020 2:21 PM