Publicidad
Idiomas disponibles
Idiomas disponibles
SAFE USE CAUTIONS
STANDARD FUNCTIONALITY
● standard functionality allows direct control of the EXTA LIFE system receivers,
● transmitter's button functionality depends on the type of a receiver the buttons have been
paired with (for example, when paired with ROP-22 receiver, the buttons can be used to
switch on / switch off the lighting and when paired with SRP-22 roller blind controller, the
buttons can be used to open / close roller blinds),
● particular buttons can be assigned to a higher number of EXTA LIFE system receivers at
the same time,
● in case one transmitter is to control more than one system receiver, the recommended
operation mode is the „switch on / switch off" mode (one button is used to switch on and
the second to switch off),
● it is possible to assign transmitter's buttons to receivers in different modes, which depend
on the type of a receiver (details are described in the instruction manuals of EXTA LIFE
receivers),
● in case buttons of one transmitter are assigned to a receiver in time mode, then it is pos-
sible to assign individual time in the range from 1 second to 18 hours to each button,
● buttons can be selectively deleted from the memory of receivers
FUNCTIONALITY WITH CONTROLLER AND EXTA LIFE APPLICTION
Using EXTA LIFE controller and the mobile application it is possible to
● assign remotely (without an access to a receiver) buttons of a transmitter to selected
receivers,
● use transmitter's buttons to perform scenes – or as a condition to perform the logic func-
tion,
● control battery status in the transmitter,
● read temperature from a sensor built-in a transmitter.
CAUTION: in order to make use of the functionalities, it is required to pair transmitter
with a controller earlier and to register the temperature sensor in the system.
Publicidad
