Publicidad
Idiomas disponibles
Idiomas disponibles
3. Operating and Programming
When Programmed Cleaning Pattern is Set:
* DEEBOT automatically conducts route planning when cleaning. If the robot is paused, moved
manually or directed by the Remote Control during cleaning, DEEBOT will reconfigure the
route and restart. Therefore, avoid using the Remote Control or moving DEEBOT manually
when it is cleaning to ensure efficiency.
* DEEBOT may pause temporarily to recalculate its cleaning path. This is normal. Please be
patient, the frequency and duration of the pause is determined by room complexity.
* If the cleaning environment contains both bare floors and carpet, barriers (for example a
closed door) should be set between different floor types and cleaning patterns should be set
accordingly. If both floor types are to be cleaned in one cleaning cycle, Random Cleaning
Pattern should be set.
Double-click the AUTO Button on the robot. Cleaning
Pattern is switched when DEEBOT emits two beeps.
Cleaning Patterns can also be set using the ECOVACS App.
DEEBOT uses the set Cleaning Pattern when cleaning in AUTO Cleaning Mode.
Select Cleaning Mode
1
AUTO Cleaning Mode
This is the most commonly used mode and is good
for every day cleaning.
* AUTO Cleaning Mode cleans using the
Cleaning Pattern set in the previous step.
Random Cleaning Pattern is best for carpet.
Programmed Cleaning Pattern is best for bare
floors.
* When the cleaning cycle is complete, DEEBOT
returns to the Docking Station.
* Use the App to increase the suction power of the robot when in AUTO Cleaning Mode. Press
in the App fro MAX suction power. Press
MAX suction power will consume more battery power.
14
EN
to switch back to standard suction power. Enabling
x2 x2
Publicidad
