Publicidad
Idiomas disponibles
Idiomas disponibles
SOLAR-02
2.2
DURING USE
We recommend carefully reading the following recommendations and
instructions:
CAUTION
• Failure to observe the warnings and/or instructions may damage the
instrument and/or its components or generate a danger for the operator.
• The symbol «
» indicates that the batteries are flat. Stop testing and
replace the batteries according to the procedure described in § 6.2
• When the instrument is connected to the circuit being tested, never touch
any lead, even if unused.
2.3
AFTER USE
When measurements are completed, turn off the instrument by pressing and
holding the ON/OFF key for some seconds. If the instrument is not to be
used for a long time, remove the batteries and follow the instructions given
in § 7.3
3
PREPARATION FOR USE
3.1
INITIAL INSPECTIONS
Before shipment, the instrument's electronics and mechanics have been
inspected. All possible precautions have been taken in order for the
instrument to be delivered without damage. However, we recommend
generally inspecting the instrument in order to detect any damage suffered
during transport. Should you detect any anomalies, immediately contact
the forwarding agent. Moreover, we recommend checking that the package
contains all parts listed in § 0. Should you find any discrepancy, please
contact the dealer. Should it become necessary to return the instrument,
please follow the instructions reported in § 8
3.2
POWER SUPPLY
The instrument is supplied by 4 x 1,5V batteries type IEC LR03 AAA. When
batteries are almost flat, the symbol "
the batteries, see § 6.2
3.3
STORAGE
In order to guarantee precise measurements, after a long storage period,
in extreme environmental conditions, wait for the instrument to return to
normal conditions (see § 7.3)
Rel. 4.00 - 22/11/22
" appears on the display. To replace
EN
21
Publicidad
