Publicidad
Idiomas disponibles
Idiomas disponibles
13. WARRANTY.
SIMA, S.A. . the manufacturer of light machinery for construction possesses a net of technical services
SERVISIMA. Repairs under warranty made by SERVISIMA are subject to strict procedures to ensure a high service
quality.
SIMA. S.A. guarantees all its products against any manufacturing defect according to the conditions stated in
the attached document "WARRANTY CONDITIONS".
The latter would cease in case of failure to comply with the established payment terms.
SIMA S.A. reserves its right to bring modifications and changes to its products without prior notice.
14. SPARE PARTS.
The spare parts for the cutting table, model MAGNUM, manufactured by SIMA, S.A. are to be found in the
spare parts plan, attached to this manual.
To order any spare part, please contact with the after-sales service of SIMA S.A. clearly indicating the
number with which the part is identified, as well as the model, manufacturing number and year of
manufacturing shown on the features plate of the machine for which it is intended
15. ENVIRONMENT PROTECTION.
Raw materials have to be collected instead of throwing away residuals. Instruments, accessories, fluids and
packages have to be sent into specific places for ecological reutilisation. Plastic components are marked for
selective recycling.
R.A.E.E. Residuals resulting from electrical and electronic instruments have to be stored into
specific places for selective collection.
16. NOISE LEVEL DECLARATION.
Level of acoustic power issued by the machine:
Level of acoustic power issued by the machine: A, LW
MAGNUM 700L
The values mentioned above are level of emission and are necessarily levels that allow working with the
machine. Still, there is a relation between the levels of emission and those of exposure. These are not reliable to
determine if they are necessary measurement of supplementary prevention. The parameters that affect the real
exposure level include the time of exposure, the characteristics of the location, other sources of noise, etc
In addition, the levels of admissible exposure can vary from one country to the other. Still, this information
allows the operator to evaluate better the risks of the machine
17. MECHANICAL VIBRATIONS LEVEL DECLARATION.
The level of vibrations transmitted to the hand-arm:
MODEL
MAGNUM 700L
MAGNUM 1000L
111,5
LEFT HAND m/ s²
0,05350
0,05350
16
, in dB
A
MAGNUM 1000L
111,5
RIGHT HAND m/ s²
0,02079
0,02079
ENGLISH
Publicidad
