Haojue TZ150S 2015 Manual De Uso página 68

KEYS
This motorcycle comes equipped
with a main ignition key and a spare
one. Keep the spare key in a safe
place.
IGNITION SWITCH (MAIN SWITCH)
The ignition switch contains three
positions:
"*" (on) position
The ignition circuit is completed and
the engine can now be started. The
key cannot be removed from the
ignition switch in this position. After the ignotion switch is
put on this position, the headlingts, the font position light
and taillights will be lit.
"%" (off) position
The ignition circuit are cut off. The engine will not start.
The key can be removed.
"4" (steering lock) position
In order to lock up the steering, first turn the handlebars
to the left, insert the key in the "%" position, turn
counterclockwise to the "4" position. The steering is then
locked. The ignition circuit are cut off.
Haojue TZ150S 99011H36640H000 V01 ES+EN 2015-1-17
NOTE: Only when the key hole is in the two positions in
the figure above can the key be completely inserted, pulled
out and turned and the ignition switch could be made on,
off and locked. If the key is partially inserted into the key
hole, the key can be turned to any positions; however, the
key cannot be completely inserted into the ignition switch
and no function can be realized.
8
https://www.motomanuals.net/
Haojue TZ150S 99011H36640H000 V01 ES+EN 2015-1-17
BWARNING
Before turning the ignition switch to the "4"
position, safely stop the motorcycle and support it
with the main stand.
BWARNING
Never attempt to move the motorcycle when the
steering is locked.
BWARNING
Do not turn the ignition switch key to the "4"
position when riding the motorcycle, otherwise the
motorcycle will lose control.
(67)
EN
(67)