Metra 99-7636B Instrucciones De Instalación página 2

1. Unclip the driver's side panel to the
right of the steering column. The panel
only needs unclipped enough to remove
the dash panel in the following steps.
(Figure A)
2. Open the passenger door, then unclip
and remove the panel on the side of the
dash. Remove (1) Phillips screw exposed.
(Figure B)
2
DASH DISASSEMBLY
(Figure A)
(Figure B)
3. Open the glove box, then unclip and
remove the glove box. (Figure C)
4. Remove (9) Phillips screws in the glove
box cavity, then remove the glove box
housing. (Figure D)
Continued on the next page
(Figure C)
(Figure D)
|
386.257.1187 MetraOnline.com