Rothenberger RO FL180 Instrucciones De Uso página 19

Transporting li-ion battery packs: The contained lithium-ion batteries are subject to the Dan-
gerous Goods Legislation requirements. The user can transport the batteries by road without fur-
ther requirements. When being transported by third parties (e.g.: air transport or forwarding
agency), special requirements on packaging and labelling must be observed. For preparation of
the item being shipped, consulting an expert for hazardous material is required. Only send the
battery pack if the housing is intact and no fluid is leaking. Remove the battery pack from the
machine for sending. Prevent the contacts from short-circuiting (e.g. by protecting them with ad-
hesive tape).
Dispatch batteries only when the housing is undamaged. Tape or mask off open contacts and
pack up the battery in such a manner that it cannot move around in the packaging. Please also
observe possibly more detailed national regulations.
2 Technical Data RO FL180
RO FL180 without battery, art.-no.: 1300003462
Voltage of battery pack ..............................................................
Power consumption .................................................... 8 W
Lamp flux .................................................................... 410 Im
Colour rendering index................................................ > 70
Correlated colour temperature .................................... 5000 K
Weight (without battery pack) ...................................... 0,46 kg (1,01 lbs)
3 Technical Data charger and battery
Battery:
U = Voltage
C = Capacity
W = Weight
Ic = Charge current
t
= Approx. charging time (90% full)
Charging voltage.............................
Charging temperature .. 0° - 50° C, 32° - 122° F
Max. discharging
temperature. ................................
Recharge battery pack before first use!
4 Function of the Unit
4.1 Overview RO FL180
1
Window/outlet of LED beam
2
Lamp head
3 On/off switch
4.2 Operating RO FL180
 Insert a fully charged battery pack (5) (taking into account the particular model).
 Tilt the lamp head (2) to adjust the angle of the light beam.
 Turn on and off at the switch (3).
Do not direct the light beam into the eyes of people or animals!
20,75 V DC
5° - 50° C, 41° - 122° F
ENGLISH
18V
Charger:
U1 = Input voltage
f1 = Input frequency
P1 = Input power
U2 = Charging voltage
= Max. charge current
I2
Nc = No. of battery cells
W = Weight
Pay attention to the electrical outlet
voltage! Check the label on the
bottom of the charger!
4
Battery pack release button
5
Battery pack
(B)
(A)
(A)
15