Ingeteam
1. About this manual
The purpose of this manual is to describe the communication via RS-485 and provide sufficient information on all
of the communications accessories available.
1.1. Recipients
This document is intended for qualified personnel.
The status of qualified personnel referred to in this manual will be, as a minimum, that which meets all the
standards, regulations and laws regarding safety applicable to the tasks of installing and operating all the
components of the installation.
The responsibility for designating qualified personnel will always fall to the company to which the personnel
belong. It is necessary to decide which workers are suitable or not for carrying out specific work to preserve their
safety at the same time as complying with occupational safety legislation.
These companies are responsible for providing appropriate training in electrical equipment to their personnel and
for familiarizing them with the contents of this manual.
1.2. Symbols
This manual uses various symbols to emphasize and highlight certain texts. The general meanings are explained
below.
General warning.
Read the section indicated.
1.3. Safety
In order to install or handle the communications accessories, follow the safety guidelines indicated in
the unit's installation manual.
All applicable safety-related legislation for electrical work must be complied with.
Carefully read the manual of the unit in which you are going to install the communications
accessories.
1.4. Waste handling
These communication accessories use components that are harmful to the environment (electronic cards, batteries
or cells, etc.).
At the end of the unit's life, the waste must be correctly processed by an authorized hazardous
waste management company.
Ingeteam, in accordance with its policy of respect for the environment, will inform the
authorized manager, via this section, of the location of components to be decontaminated.
16
General information.
AAX2011IQM02_C - User manual
About this manual