JFA Electronicos ACQ A1200 Manual De Instrucciones página 15

CONTROL ACQUA 1200 - INSTRUCTION MANUAL
The receiver unit can operate with two transmitters, simply by
executing steps 1 and 2 of the item "LEARN MODE" to add the new
transmitter. This feature is recommended for customers who wish to
use, in conjunction with the ACQUA 1200 control, another transmitter
unit from JFA Electronics.
LEARN MODE
In Learn Mode, the ACQUA 1200 receiver unit learns the functions
of the original player control:
1. Press the "A" key (indicator 1) on the ACQUA 1200 receiver
unit, the action LED will be permanently lit;
2. Press the ACQUA 1200 transmitter unit key (indicator 2), which
you want to record, until the action LED is ashing;
3. Point the player's original controller to the Code IR input and
press the key you want to record (indicator 4) until the action
LED ashes quickly, then stays lit;
4. Repeat the second and third steps for the other keys until all the
desired keys are learned;
5. To end the learning process, press the "A" key (indicator 1) on
the ACQUA 1200 receiver unit or wait 10 seconds to exit the
LEARN MODE.
MEMORY MODE
In memory mode, the receiver unit uses the codes of the main
player models that it already has stored in its memory. See tables 1
and 2 for more information on supported models.
To select a model, follow these steps:
1. Press the "M" key (indicator 3) on the receiver unit, the action
LED will be permanently lit;
CONTROL CODING
14