Publicidad
Idiomas disponibles
Idiomas disponibles
CONTROL ACQUA 1200 - INSTRUCTION MANUAL
To replace the battery, remove the two screws on the back of the
drive unit with a small Phillips screwdriver to gain access to the battery.
Replace the battery (model: 23A 12V battery) ensuring correct
polarity¹. The correct battery connection polarity is indicated on the
receiver unit's internal plate as (+) for the positive pole and (-) for the
negative pole (indication 1).
Close the back ensuring the correct position of the sealing
membrane over the xing tabs, ensuring that the control is water
resistant (indication 2).
1 - Incorrect installation of the battery can cause damage to the device.
BATTERY REPLACEMENT
1
2
15
Publicidad
