Publicidad
Idiomas disponibles
Idiomas disponibles
CONTROL ACQUA 1200 - INSTRUCTION MANUAL
RECEIVER
UNIT
TRANSMITTER
UNIT
APPROVED PRODUCT
01260-14-04318
The ACQUA 1200 remote control is splash and water resistant, and has
been tested under laboratory controlled conditions with the submerged
transmitter unit at 10 cm depth for 5 minutes.
The resistance is not a permanent condition and can decrease over
time. Do not replace the battery with the ACQUA 1200 wet remote
control. Damages arising from contact with liquids are not included in
the warranty.
If you have any questions, please contact our technical support:
suporte@jfaeletronicos.com and suporte2@jfaeletronicos.com
TECHNICAL SPECIFICATIONS
Operating voltage: 9 to 16 V
Stand-by consumption: 13 mA
Polarity reversal protection: YES
Battery model: A 23 - 12 V
Operating frequency: 433.92 MHz
Polarity reversal protection: NO
Radiated power (3 meters): 0.808 mW
Modulation
"This equipment operates on a secondary basis,
that is, it is not entitled to protection against
harmful interference, even from stations of the
same type, and cannot cause interference to
systems operating on a primary basis."
+55 (31) 2533-6100
19
Publicidad
