Publicidad
Idiomas disponibles
Idiomas disponibles
CONTROL ACQUA 1200 - INSTRUCTION MANUAL
RECOMMENDED RECEIVER INSTALLATION
Installation of the equipment in the sound system is done using a
polarized power cable. Make sure the white striped wire from the
receiver unit is connected to the battery's direct positive (+12V) and
the black wire to the negative (GND).
Polarized cable
feeding
The receiver unit should preferably be xed away from metal parts
and car bodywork (which degrades the transmission) keeping,
whenever possible, the antenna unobstructed to allow the greatest
possible range of the equipment.
Position the infrared emitter, from the receiver unit aimed at the
player's panel, so that there are no obstacles between them. It is
recommended to install the receiver unit in the trunk and the IR emitter
in the center of the rear window, pointing towards the front of the
player. Make sure the wires are not pinched in the installation process.
Player
Infrared emitter
IR emitter
Receiving
unit
16
Publicidad
