Descargar Imprimir esta página

Hansgrohe AXOR Bouroullec 19155000 Modo De Empleo/Instrucciones De Montaje página 4

Ocultar thumbs Ver también para AXOR Bouroullec 19155000:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The shower system may only be used for bathing,
hygienic and body cleansing purposes.
The hot and cold supplies must be of equal
pressures.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The fitting must be installed, flushed and tested after
the valid norms!
• If the instantaneous water heater causes problems or
if you wish to increase the water flow, the EcoSmart
(flow limiter) located behind the aerator can be
removed.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
The product is exclusively designed for drinking water!
Hansgrohe mixers can be used together with
hydraulically and thermically controlled continuous flow
heaters if the flow pressure is at least 0,15 MPa.
4
English
Symbol description
®
max. 1 MPa
0,1 – 0,5 MPa
1,6 MPa
max. 80°C
65°C
Assembly see page 34
Do not use silicone containing acetic acid!
Dimensions (see page 31)
Flow diagram (see page 31)
with EcoSmart
without EcoSmart
i
Installation example (see page
32)
Spare parts (see page 37)
Special accessories (order as an
extra)
Hose kit #38959000
In combination with a Bouroullec sink, the
hose kit #38959000 is not required.
Operation (see page 38)
Hansgrohe recommends not to use as
drinking water the first half liter of water
drawn in the morning or after a prolonged
period of non-use.
Cleaning (see page 39)
and enclosed brochure
Test certificate (see page 40)
®
®

Publicidad

loading

Este manual también es adecuado para:

Axor bouroullec 30 19156000