Descargar Imprimir esta página

Corega BAR-SD Manual De Instrucciones página 15

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 76
PPTP
• LAN IP Address: Enter the IP address of the router (default = 192.168.123.254)
• My IP Address: The IP address of the PPTP Client you want to negotiate with the PPTP server.
• My Subnet Mask: The subnet mask of the PPTP Client
• Server IP Address: The address of the PPTP Server
• PPTP Account: The login name on the PPTP Server
• PPTP Password: The password of the user account
• Connection ID: Optional information needed by some ISPs
• Maximum Idle Time: If Dial-on-demand is enabled, this parameter is the number of minutes that the WAN connection is kept active after the last data was sent.
When this time period is exceeded, this WAN link will be dropped. This feature ensures that when frequent data traffic is sent or received by the WAN link, that the
Dial-on-demand startup delay does not impede the throughput for the user. Setting to 0 will disable this feature.
• Auto-reconnect: If this box is left blank, then the connection will always be active. If the box is checked, then the router will start a WAN connection whenever there
is data to be transferred. This allows the router to be used with ISP accounts when the ISP bills per second of usage.
DHCP Server
DHCP Server. A DHCP (Dynamic Host Configuration Protocol) Server can automatically assign IP Addresses to each computer in your network. Unless you already have a
DHCP Server in you LAN, it is highly recommended that you set your router to act as a DHCP server.
• Enable DHCP Server: Select "Enable" to use the DHCP server option of the router. If you already have a DHCP server in your network, set the router's DHCP
option to "Disable".
• IP Pool Address Range: Enter range of numbers, from 0 to 253, for the DHCP server to use when assigning IP Addresses to the attached LAN devices.
• Lease Time: Enter the time that the IP addresses remain valid, before being timed-out buy the router. A recommended value for this setting is 2 hours.
• Domain Name: This is an optional entry for a Domain name server, which will be passed to clients on the local LAN.
13

Publicidad

loading

Productos relacionados para Corega BAR-SD