Corega BAR-SD Manual De Instrucciones página 7

Rear Panel Connections
The following figure shows the rear view of the Corega BAR-SD Broadband Access Router.
1 2 3 4 Power Init
WAN
• Init. Press and hold the Initialize button. The Status LED will stop flashing, and then flash 6 times. Then release the button.
• WAN. This port is for connecting to the Wide Area Network using an ADSL or Cable Modem.
• LAN 1-4. These ports are used to connect computers and peripherals to the BAR-SD.
• Power. This socket is used to connect the external power supply to the router.
Before connecting your Corega BAR-SD Router
Before you connect your Corega BAR-SD Router, Corega recommend that you download installation instructions particular to your ISP from the Corega website.
These instructions will help you know how to configure to the Corega BAR-SD Router to work with your ISP.
www.corega-international.com
In addition, Corega recommend that you visit the URL support site of your ISP, and download and print any information they have on your type of connection.
5