Corega BAR-SD Manual De Instrucciones página 9

Internet Access
This chapter describes the procedures necessary too configure the basic functions and to start up your Corega BAR-SD Router.
Prepare Network Information
Before setting up your Corega BAR-SD Router, Corega suggest that you complete the table below with the necessary information which should be supplied by your ISP.
This will help when configuring the router.
Provided by some ISPs
IP address given by ISP:
PPP authentication:
WAN Connection Type
Web-based User Interface
The Corega BAR-SD Router is designed to use Web-based User Interface for configuration. Launch your web browser and type http://192.168.123.254 in the browser's
address box. This address is the default factory set IP Address of your router.
Note! Your computer must have a compatible IP address.
If your computer is using Dynamic IP address, it will have a compatible IP address given to it by the BAR-SD router. (You may have to reboot the Corega BAR-SD Router,
then the PC for this to occur).
If your computer is using a Fixed (Static) IP address, then you will have to manually program the computer to have a compatible IP address –see Appendix A.
The following screen should then appear.
7
Host Name:
Domain Name:
• Dynamic IP Address
• Fixed (Static) IP Address:
Subnet Mask:
Default Gateway:
DNS Server Primary:
DNS Server Secondary:
DNS Server Third:
Login Name:
Password:
Dynamic IP (DHCP)
Fixed (Static) IP
PPPoE
PPTP