Opsial O'PANTHER Instrucciones página 17

MAIN FEATURES
The design is the result of an ergonomics' study, with particular attention to the internal space that
makes our mask easy to use and comfortable to wear, fully protecting face and neck.
The material of the outer shell has a soft consistency and it is very resistant to both low and high
temperatures, fireproof, resistant against corrosion with a high durability.
The new developed protection screen is made with liquid crystals of the highest quality that allow a
shielding from ultraviolet and infrared rays at the highest levels and a "natural" vision from the screen.
The maximum level of protection is DIN 16, this allows to protect the user from optical injuries due to
harmful rays.
The filter is equipped with four sensors and an electronic circuit that allows it to react to the welding
arc in 1 / 10,000 seconds. The settings range is from DIN 5 to DIN 9 and from DIN 9 to DIN 13. it can
also be adjusted the intervention time from 0.1s to 0.8s.
Three possible selections welding - cutting – grinding.
This mask is suitable for all welding and cutting processes.
TABLE OF PROCESS / AMPERE
CERTIFICATION
These welding masks named O'PANTHER and / or O'RACING of the OPSIAL brand comply with the
instructions of the European Standards EN 379:2003+A1:2009 - DIN EN 166:2002-04 - EN 175:1997.
The certification procedure complies with Regulation (EU) 2016/425 on personal protective
equipment and was carried out by the certifying body:
For standards EN 175:1997 et EN 379:2003+A1:2009 :
ECS GmbH-European Certification Service – Notified entity cod. 1883
Augenschutz und Persönliche Schutzausrüstung
Laserschutz und Optische Messtechnik
Hüttfeldstraße 50 - 73430 Aalen (Germany)