Opsial O'PANTHER Instrucciones página 3

WARNINGS
Before and after use please check:

Position, locking and conditions of the glass filter: replace it if broken or if cracks are
visible; clean it and if necessary remove from its surface the drops of molten metal
which might reduce visibility.

State and conditions of the welding helmet for deformations or damages which might
make the welding helmet not suitable for the task. „

The user has to be warned that the ADF (auto darkening filter) should only be used if
the backing lens is placed behind the ADF.

If the parts of the mask (ADF, shell, cover lens, backing lens) have various markings
concerning their mechanical strength , the complete helmet has only the lowest
mechanical strength of its parts.

Keep the welding helmet far from flames and intense heat sources; do not welding
helmets on fire.

While welding for long periods check the welding helmet at regular intervals for
deformations or damages.

Store the welding helmet in such a way to prevent deformations in its shape and
dimensions or cracks in the glass filters.

The sensor have to be cleaned and unobscured.

Clean the welding helmet with a solution of soapy water. Chemical solvents will
damage the welding helmet.

This welding helmet will not protect against explosive devices or corrosive liquids.

Use and store only at temperatures indicated on the specifications.

This Auto-Darkering welding helmet is not suitable for laser welding and oxyacetilene
welding/cutting process.

This Auto-Darkering welding helmet will not protect against severe impact hazards,
including grinding discs.

If the impact letter followed by letter "T", you can use it for protection against high
speed particles at extremes of temperature. If the impact letter does not followed by
letter "T", you should only use the eye protector for protection against high speed
particles at room temperature.

The eye-protectors against high speed particles worn over standard ophthalmic
spectacles may transmit impacts, thus creating a hazard to the wear

If the filter does not switch to dark state anymore please stop immediately and contact
your local dealer. „ Regularly replace the cracked / scratched / pitted front cover lens.