PROGRAMMING
Time switch function - JMWST-5
1.
Manual mode - no timer function:
Automatic OFF.
2.
Automatic mode - timer function in UP and DOWN:
Shutters open and close automatically at previously programmed times.
3.
Automatic mode - timer function in UP and DOWN with random function:
Shutters open and close automatically at previously programmed times.
However, the set opening and closing times are shifted randomly in the range of 0 to 15 minutes*.
*Der Zeitraum kann nicht beeinflusst werden - wird durch die Elektronik willkürlich gesteuert!
Enable / disable jog mode
1.
Power is on (actuator is connected and ready for operation).
2.
Press P2 programming key 1 x. Motor beeps 1 x.
3.
Press UP key 1 x. Motor beeps 1 x.
4.
Press P2 programming key 1 x. Motor beeps 3 x*.
OK! Jog mode is activated/deactivated
*The frequency of the beeps or the reaction of the motor / shutter depends on the receiver.
Please refer to the corresponding instructions of the respective receiver / motor.
24
1 2 3 4 5
Time set / channel selection key K1
Mode button
Time set / channel selection key K2
UP
Stop
DOWN
P2 button