JULIUS MAYER Wandsender JMWS-1 Instrucciones Originales página 26

PROGRAMMING
Setting the current time and date
Each keystroke must be executed within 4 seconds!
Otherwise, the system automatically exits the programming mode.
26
Switch to manual mode as described on page 25.
1.
2.
The hour display flashes.
1 2 3 4 5
3.
4.
The minute display flashes.
1 2 3 4 5
5.
6.
The Day of the week display flashes.
1 2 3 4 5
7.
8.
9.
10. The programming of the time and day of the week is completed, the settings
Press and hold the K2 key.
After approx. 5 seconds, the current hour of the time flashes.
Release the key.
Use the UP and DOWN keys to set the current hour.
After setting the hour, briefly press the K2 key.
Use the UP and DOWN keys to set the current minute.
After setting the minute, briefly press the K2 key again.
Use the UP and DOWN keys to set the current day of the week.
After setting the day of the week, press and hold the
the K1 key for approx. 5 seconds.
The hour and minute indicators flash simultaneously.
are saved.