Activating and deactivating the timer function - JMWST-5
By pressing and holding the MODE button, you can switch between the individual modes.
1 2 3 4 5
Press and hold the MODE key. After approx. 5 seconds, the display changes from „MAN" to „AUTO".
Release the key.
1 2 3 4 5
Press and hold the MODE key again. After another approx. 5 seconds, the display changes from
„AUTO" to „AUTO with random function".
Release the key.
1 2 3 4 5
MAN / Manual mode
AUTO / Automatic mode
Automatic mode with random function
PROGRAMMING
25