Publicidad
Idiomas disponibles
Idiomas disponibles
Setting the Time, Date & Measurement Unit
To ensure the stored measurement result has correct
time record, please set time and measurement before
device is used.
Before use, turn the monitor "ON" by using the switch
on top of the unit.
1. When the monitor is "ON", press and hold
"User 1" button for 5 seconds to start
setting the date. The year will appear first.
2. As shown below, the blinking numeral
representing [YEAR] will appear.
"Query" button to change the
Press
numeral. Each press will increase the
numeral by one in a cycling manner.
There is no button to go backwards/
decrease a value.
3. Press "User 1" button again to confirm
[YEAR]. Then the numeral representing
[MONTH] blinks.
16
4. Repeat step 2 and 3 to confirm
[MONTH] and [DAY].
NOTE: This is arranged
[DAY]/[MONTH]
5. Repeat step 2 and 3 to confirm
[HOUR] and [MINUTE].
Time set to 24 hour day.
No AM/PM setting.
6. Repeat step 2 and 3 to confirm
the unit of measurement:
mmHg (0, in US),
kPa (0.0, in most other countries)
7. After confirming the unit,
the LCD will display "DONE",
then the monitor display will
go dark.
NOTE: Changing the ON/RESET switch to "RESET"
will clear any previous Date and Time settings.
We recommend leaving the switch to "ON".
17
Publicidad
