Publicidad
Idiomas disponibles
Idiomas disponibles
CONTROLS
TEMPERATURE
DISPLAY
AUTO MODE
TEMPERATURE
BUTTON
ADJUSTMENT BUTTONS
AUTO
10 English
DIRECT MODE
SPEED CONTROL
BUTTON
BUTTONS
SPEED
DISPLAY
DIRECT
SPEED
HOW TO USE
1. Touch
to power unit ON or OFF.
2. Select desired speed setting by pressing
(4) speeds: 1- LOW, 2- MEDIUM, 3- HIGH & 4- TURBO. Speed is
indicated by number show on display.
POWER
3. Touch
to change from direct airflow to exhaust. Touch the
BUTTON
button again to change from exhaust to direct airflow.
DIRECT MODE
EXHAUST MODE
Note: When first plugged in and turned on, the unit will move to
DIRECT MODE. After that, the unit will remember user settings
when powered ON/OFF.
POWER
4. The product includes an integrated thermostat and the indoor
room temperature will be illuminated on the display only when the
or
. There are four
thermostat is activated (in AUTO MODE). Touch to activate AUTO
MODE.
• Touch
or
button to set your ideal temperature, between
60 - 90° F, holding either button for 3 seconds will allow for quick
temperature adjustment.
• While in this adjustment mode, the temperature display will
momentarily flash and then return to display the current indoor
room temperature.
• Touch the to deactivate AUTO MODE. The icon will turn white
to indicate AUTO MODE is deactivated.
Note: Temperature display is Fahrenheit only.
Note: Your TRANSOM is equipped with auto-dimming controls. All
non-essential lights will turn off after a few seconds of inactivity. Only
the power button will remain illuminated. The first touch to the control
panel or remote will wake up the unit, allow for setting adjustment and
will go dark again after a few seconds of inactivity.
11
English
Publicidad
