JVC KD-R992BT Manual De Instrucciones página 23

BLUETOOTH®
BLUETOOTH — Audio
For key layout on the faceplate, see page 3 or page 4.
While in BT AUDIO source, you can connect to five Bluetooth audio devices and
switch between these five devices.
Audio player via Bluetooth
1
Press source button repeatedly to select BT AUDIO.
• Pressing enters BT AUDIO directly.
2
Operate the Bluetooth audio player to start playback.
To On the faceplate
Playback/pause
KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT:
Press the volume knob.
KD-R891BT: Press
Select group or folder Press
Reverse skip/Forward skip Press
Reverse/Fast-forward Press and hold
Repeat play Press
TRACK REPEAT, ALL REPEAT, REPEAT OFF
Random play Press
GROUP RANDOM, ALL RANDOM, RANDOM OFF
Select a file from a folder/ Refer to "Select a file from a folder/list" on page 10.
list
Press 5. *
Switch between connected
Bluetooth audio devices
* Pressing the "Play" key on the connected device itself also causes switching of sound output from the
device.
Operations and display indications may differ according to their availability on the
connected device.
.
.
.
.
repeatedly.
repeatedly.
Settings to use JVC Remote application
JVC Remote application is designed to control the JVC car
receiver's operations from the following devices.
KD-R992BT/KD-R899BT/KD-R891BT: iPhone/iPod (via Bluetooth
KD-R794BT/KD-R792BT:
Preparation:
Install the latest version of JVC Remote application on your
device before connecting. For more information, visit <http://
www.jvc.net/cs/car/>.
1
Press and hold .
2
Perform 'select an item ( 3 or 4)' operation to
select an item. ( 20)
3 2
Repeat step until the desired item is selected or
activated.
4
Press to exit.
To return to the previous setting item, press
or via USB input terminal)
or Android smartphone (via
Bluetooth)
Android smartphone (via
Bluetooth)
.
19
ENGLISH