Descargar Imprimir esta página

Tognana Avantspace D2DFI01AVSP Manual De Instrucciones página 16

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44
COMPONENTS
1
2
4
USING THE PRODUCT
This appliance is FOR DOMESTIC USE ONLY.
The charging adapter must be connected to an AC power outlet (normal household
current). Do not use other power outlets.
DO NOT USE THE USB CORD IF THE POWER CORD OR PLUG ARE DAMAGED.
Use only the charging adapter included in the packaging.
SAFETY RECOMMENDATIONS FOR CHARGING ADAPTER AND USB
CORD
1. Never pull on the cord.
2. To insert the plug, grab it firmly and guide it into the outlet.
3. To disconnect the appliance, grab the charging adapter and remove it from the outlet.
4. Before each time the appliance is charged, inspect the USB cord to check for any tears
and/or signs of abrasion. If these are found, this means the USB cord needs to be replaced.
5. Never wrap the cord tightly around the appliance as this may unduly stress the cord in the
point where it enters the charger, or the charging port of the appliance, and cause it to fray
if it breaks.
BEFORE FIRST USE
1. Extract the various components from the packaging, check that they are intact and
complete, gently remove any protections and labels. The packaging includes:
No.1 Motor body
14
6
3
10
5
7
9
1. Motor body
2. Whisk
3. Blender shaft with blades
4. Accessory support base
5. Graduated glass with lid
6. Release key
7. Battery charge LED indicators
8. USB-C cord
9. Charging adapter
10. Power buttons (speed I and II)
8

Publicidad

loading

Este manual también es adecuado para:

Avantspace d2dfi01avspd2m6