Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING
• Note:
• DO NOT PLACE THE MOTOR BODY IN THE DISHWASHER.
NEVER SUBMERGE THE MOTOR HOUSING, CHARGING
•
ADAPTER, OR CHARGE CORD IN WATER OR OTHER LIQUIDS
Clean the motor section with a damp cloth. Add some delicate detergent if it is very dirty.
•
•
The graduated glass, shaft with blades and whisk can be washed with warm water and
washing-up liquid.
Do not use steel wool, solvents or abrasives to clean the plastic parts.
•
the blades during cleaning!
•
MAINTENANCE
Make sure all parts are clean and dry before storing. Never store the appliance when it is
•
still wet.
In case of non-use for a period of time exceeding 3 months, it is advisable to recharge the
•
Store in a dry place at an ambient temperature of 5 ℃ - 35 ℃.
device before use.
•
TECHNICAL DATA
Lithium battery pack: 11.1V, 2000mAh, 22.2Wh
•
Power: 200W
•
USB-C cord
•
•
Input voltage: DC5V, 2A
•
Battery duration: up to 30
Dimensions in immersion blender configuration
•
Net weight in immersion blender configuration
•
Charging adapter
Input: AC 100-240V ~ 50-60Hz, 0.5A max
•
•
Output: DC 5V – 2.0A, 10W
TROUBLESHOOTING
Problem
The immersion blender does not turn
on.
The immersion blender does not
charge.
The immersion blender stops during
use.
The problem is not solved.
18
Handle the blades with care because they are sharp!
portions of vegetable soup, each 350 ml
Check that the blender is charged.
Charge the battery when the battery indicator 1
flashing or when the battery is completely flat.
Check that the cords have been properly inserted in
their slots.
In case of an overload or jam, the blender
automatically turns off to avoid damage to the motor.
Divide the contents into smaller pieces. For certain
recipes, adding liquids into the jug can reduce engine
strain.
Contact an authorised service centre.
: 6.5x6.5x41 cm
: 650 g
Solution
.
Avoid touching
Publicidad
