Publicidad
Idiomas disponibles
Idiomas disponibles
TORQUE RAMP
BRAKE
LIGHT
ERASING ALL REMOTE CONTROLS
Erases and boots the memory in order to add new remote controls.
Instructions:
1.
The gate must be still;
2. Close the 'JPROG' jumper;
3. Press and release the 'SET' button on the control board (once);
4. 'N5' (TX) LED must remain lit;
5. Press the 'SET' button on the control board and keep it pressed for 10 seconds;
6. 'N8' LED must remain lit, indicating that all remote controls have been erased
from the memory;
7. In order to finish, open the 'JPROG' jumper.
ADDING REMOTE CONTROLS
It adds new remote controls to the control board, so that they can trigger it.
Instructions:
1.
The gate must be still;
2.
Close the 'JPROG' jumper;
3.
Press and release the 'SET' button (once);
4.
'N5' (TX) LED must remain lit;
5.
Press the button of the remote control one wants to add and keep it pressed;
6.
'N8' LED must remain flashing;
7.
Press and release the 'SET' button on the board to confirm the operation;
8.
'N8' LED flashes once (button already added), blinks twice (button already ad-
ded and new synchronization for a Rolling Code Remote control) or three times
(memory full);
9.
Release the button of the remote control;
10. Go back to step 3 to add a new button of the remote control;
11. In order to finish, open the 'JPROG' jumper.
COMMAND RECEIVED DURING OPENING
Permission for a command from either a pushbutton or a remote control to be accep-
ted during the opening maneuver.
Instructions:
1.
The gate must be still;
2. Close the 'JPROG' jumper;
3. Press and release the 'CMD' button on the board (once) to show the current
adjustment.
4. Press and release the 'CMD' button as many times as necessary until one reaches
the desired adjustment;
5. In order to finish, open the 'JPROG' jumper.
LED indications:
•
'N1' flashing = Function disabled.
•
'N1' lit = Function enabled.
STRENGTH (ELECTRONIC CLUTCH)
In order to assure the efficiency of this security sensor device, proceed as follows:
Ramp Torque (Strength)
Brake
Courtesy light time
27
Publicidad
