Assembling And Adjustments; General; Handle - Husqvarna LB 348V Classic Manual De Instrucciones

General

IMPORTANT! Prevent unintentional
!
starting by removing the ignition cable
from the spark plug.

Handle

Assembly
• Loosen the lower knobs.
• Adjust the hight of the handle and tighten the knobs
securely.
Assembly of the catcher
• Hook the upper cover on the attachments on the lower
cover.
• Lower the upper cover. Make sure the edge strip is
placed on the outside of the lower cover.

ASSEMBLING AND ADJUSTMENTS

• Start by hooking the end of the metal ledge into the
slots of the lower cover.
• Guide the metal ledge around both the upper and
lower cover. Fasten the metal ledge on the lower
cover.
• Lift the hind shield and suspend the grass container.
–
English 75