Bastilipo Varadero Manual De Instrucciones página 8

Technical Data
Nominal voltage: 220-240V, 50 Hz
Protection class: II
Nominal power: 45 Watt
Fan Assembly
Attach the oscillating base of the fan to
the stand base and pass the plug and
power cord through the groove in the
stand base.
Then screw the oscillation base to the
support base. Once the tower fan is fully
assembled, you can plug it into the power
outlet.
Connecting the fan body and
foot
1. Remove the plastic nut (5) under- neath
the fan body.
2. Connect the assembled foot with the
fan body.
3. Tighten the plastic nut (5) at the bottom
side of the fan body.
4. Route the power cable through the
retainles underneath the foot as shown in
the illustration below to ensure safe
positioning of the fan.
How to inserting batteries into
the remote control
Remove the battery compartment (6)
underneath the remote control and insert a
type CR2025 3 V battery.
NOTE
Do not use rechargeable batteries!
No. Designation
7 OSC button
8
Timer button
Mode button
9
Fan stage button
10
8
Meaning
Activating and deactivating
the oscillation function
For automatic switch off
setting the number of hours
activated timer
Selecting the operating
mode normal, natural,
night
Setting the fan stage (1-3)
Low speed, medium speed
and high speed