HEINE HSL 10 Serie Manual De Instrucciones página 7

HSL 10x (8):
➀ ➁ ➂
see figures
changing the bulb
• Remove the HSL from the handle.
• Unscrew the connector (3) and pull out the bulb (4).
• Wipe the glass of the bulb clean with a soft, clean cloth.
• Insert the bulb so that the pin (5) coincides with the groove.
• Screw the connector back in.
HyGIENIc cLEANING / PRocESSING
Use only a damp cloth with soap or alcohol to wipe the housing clean. Use an optical cleaning cloth to clean
glass surfaces. Sterilize only by ethylene oxide.
Do not immerse in fluids.
Maintenance
This product does not require regular maintenance.
Service
This product does not require regular service.
disposal
The product must be recycled as separated electrical and electronic devices. Please observe the relevant
state-specific disposal regulations.
General Notes and Warnings
Check the correct operation of the product at regular intervals. Do not use the equipment if it shows visible
signs of damage.
- Use only suitable power sources which are approved for medical use. The supply voltage must correspond
to the bulb voltage. We can only guarantee the performance of the HSL 150/alpha+ HSL 150 if original
HEINE accessories are used.
Do not use the HSL 10x as an loupe. Do not look into the sun with the HSL 10x.
The HSL 10x can only be used when fitted to the HEINE hand-held slit lamp HSL 150 and alpha+ HSL 150.
This product is a precise optical instrument. Please handle this product with care and store it in a clean place.
- The performance of this instrument can only be guaranteed if genuine HEINE rechargeable batteries or
alkali manganese batteries are used.
- We can only guarantee the safety and performance of this instrument if original HEINE bulbs are used.
This product is not allowed to be entered or used in strong magnetic fields like MRI scanners.
Explanation of utilized symbols
The following symbols are used on the device or on the packaging:
The CE mark indicates that the product
complies with the European medical
device directive 93/42/EEC.
REF
Catalogue- or reference number
SN Serial number
Manufacturer
Date of manufacture
Product bearing this symbol may not be
disposed of together with general household
waste, but instead requires separate dispo-
sal according to local provisions. (European
Waste Electrical and Electronic Equipment
Directive, WEEE)
Temperature limits in °C for storage and
transport
med 11303 2013-10-28
Temperature limits in °F for storage and
transport
Humidity limitation for storage and transport
Please read and follow the instructions for
use and keep them for future reference
(background color blue; foreground color
white)
Fragile, handle with care!
Keep dry
Interference may occur in the vicinity
of equipment marked with the following
symbol
"Grüner Punkt" (country-specific)
7/24