Hedson IRT-System IRT-301 Manual De Instrucciones página 3

1. Field of application
The mobile dryer is an effective aid in the paint
workshop. It is suited for all types of small and
medium-sized paint repair work.
The mobile dryer is primarily intended for forced
drying of putty, filler, base coat and finishing coat.
It is used in the pre-treatment area and in the finish-
ing area.
Well-known companies within the automotive in-
dustry use mobile dryers for small-scale repair work
and for final curing before polishing.
2. Product description
The IRT-300 mobile dryer is a simple, manoeuvrable
piece of equipment with one or two compact cas-
settes. Each cassette contains 3 gold coated reflec-
tors and is equipped with a ventilator in order to
increase both safety and operational life-span. Its
design and a gas spring ensure that adjustment of the
cassette is easy. The IR lamps are simple to replace.
A mesh protects the lamps and reflectors from me-
chanical damage. The control unit incorporates sev-
eral programme selection possibilities and each pro-
gramme step can have preheating and drying times
programmed.
2.1 Particular advantages
2.1.1 Higher quality
By using the mobile dryer on putty, a higher quality
is attained, even on the top coat. The high surface
3. Technical data
IRT-301
Short wave IR radiation source
230 V , 1 ~
Rated voltage 220-240V ,1~/PE 220-240V , 3~/PE 380-420V,3~/PE
Rated frequency 50 - 60 Hz
Rated current 13 A
Rated power 3 kW
Fuse 16 A delay
action
Drying temp. Max 170°C
Noise pressure < 70 dB (A)
level
For measurement and specification details, see the last page.
IRT-301, 302, 230 V, 400 V, 1 Ph, 3 Ph
230 V , 3 ~ 400 V , 3 ~
50 - 60 Hz 50 - 60 Hz
8 A 5 A
3 kW 3 kW
10 A delay 10 A delay
action action
Max 170°C Max 170°C
< 70 dB (A) < 70 dB (A)
temperature and heating of the material from the
inside and outwards ensures that all solvents and
reaction products disappear.
2.1.2 Short drying times
Putty 2 - 4 mins.
Filler 4 - 8 mins.
Primer 6 - 9 mins.
Base coat 5 - 9 mins.
Top coat 7 - 12 mins.
Clear varnish 6 - 12 mins.
2.1.3 Low energy consumption
Energy is used efficiently through short-wave tech-
nology and gold-coated reflectors.
2.1.4 Drying surface
From a distance of 50 cm, IRT-300 produces the
following drying surfaces on black enamelled sheet
metal:
1,0 m
IRT-301 IRT-302
IRT-302
Short wave IR radiation source
230 V , 1 ~
Rated voltage 220-240V ,1~/PE 220-240V ,3~/PE 380-420V ,3~/PE
Rated frequency 50 - 60 Hz
Rated current 26 A
Rated power 6 kW
Fuse 32 A delay
action
Drying temp. Max 170°C
Noise pressure < 70 dB (A)
level
1,6 m
230 V , 3 ~ 400 V , 3 ~
50 - 60 Hz 50 - 60 Hz
15 A 9 A
6 kW 6 kW
16 A delay 10 A delay
action action
Max 170°C Max 170°C
< 70 dB (A) < 70 dB (A)
3