Publicidad
Idiomas disponibles
Idiomas disponibles
LED Indicators
Low Battery
Charging
Fully Charged
1
2
Bluetooth Pairing /
Multipoint Connectivity
Bluetooth Connection
Established
Master Reset
To initiate a Master Reset, enter Bluetooth pairing mode,
then press and hold the Volume + and Volume - buttons for
5s. Upon completion, Outlier Free will play a voice prompt
of "Power Off" before powering off.
Master Reset is reserved for cases where users encounter
issues while headphones are in use or during situations
such as: Bluetooth pairing failure, random LED blinking, or
to reset all data.
Blinks red every 3s
Solid red
Solid blue
Alternate red and blue
Blinks blue once every 5s
when audio is playing
Blinks blue twice every 5s
when no audio is playing
5s
Charging Outlier Free
Ensure that the magnetic charging cable is securely
connected to the headphones' magnetic charging port
before connecting it to a power source to charge. If the
magnetic charging cable is not secured or if it is connected
incorrectly, remove the cable, and reconnect it to the
headphones. It is essential for the headphones to be
connected securely and properly to the charging cable to
prevent short circuit when there is an active current.
Technical Specifications
Headphone Drivers: Bone Conduction Transducers
Frequency Response: 20–20,000 Hz
Microphones: Omni-directional x 1
Bluetooth Version: Bluetooth 5.3
Bluetooth Profiles
• A2DP (Advanced Audio Distribution Profile)
• AVRCP (Audio / Video Remote Control Profile)
• HFP (Hands-free Profile)
Audio Codec: SBC
Operating Frequency: 2402–2480 Hz
Operating Range: Up to 10m / 33 ft
Voice Assistant Support: Siri and Google Assistant
Playtime: Up to 10 Hours*
Charging Time: 2 Hours
Charging Interface: USB-A
Battery Type: Rechargeable Lithium-ion Polymer Battery
180 mAh 0.666 Wh
Input: 5V
1A
Operating Temperature: 0–45°C
Maximum RF Output Power: 4 dBm
IP Rating: IPX5
*Based on moderate volume level. Actual battery life will vary
with use, settings, songs, and environmental conditions
Publicidad
